삼성 PDP F5300 캘리브레이션 설정값

삼성의 F5300 PDP  TV는 무선 WiFi도 안되고, 스마트 TV기능도 없고, 3D 기능도 없습니다. 대신에 10포인트 캘리브레이션 기능을 넣었습니다. 오로지 화질에만 집중한 제품이라고 할 수 있습니다. 

캘리브레이션만 잘한다면 어떤 디스플레이보다 우수한 화질을 선사할 수 있는 포텐셜을 갖춘 제품입니다.

아래 F5300의 캘리브레이션 값을 모아봤습니다.

환경과 제품에 따라 특성이 다르기 때문에 캘리브레이션이라고 할 수 는 없습니다. 색감이 어떻게 바뀌는지 비교하는 정도로 만족하고 있습니다.

PN60F530 설정#1 : 

링크 : http://www.avsforum.com/forum/167-plasma-flat-panel-displays/1477056-samsung-pn60f5300-calibration-settings-using-ps3.html

I tested this TV using the “Spears and Munsil HD Benchmark Blu-disc” played through a PS3.

PN60F530 Settings: PS3와 같이 사용할 때 캘리브레이션한 값입니다. 저는 아래 값을 사용중입니다.

-Picture Menu
Mode: Movie
Cell Light: 20
Contrast: 90
Brightness: 43
Sharpness: 0
Color: 51
Tint: G50/R50
Picture Size: Screen Fit

-Advanced Settings Menu
Dynamic Contrast: Off
Black Tone: Off
Flesh Tone: 0
RGB Only Mode: Off
Color Space: Custom (see below)
White Balance: (see below)
10p White Balance: On (see below)
Gamma: 0
Motion lighting: Off (grayed out)

Color Space submenu:
Red: Red 49, Green 23, Blue 15
Green: Red 46, Green 49, Blue 16
Blue: Red 6, Green 14, Blue 53
Yellow: Red 50, Green 50, Blue 17
Cyan: Red 47, Green 49, Blue 50
Magenta: Red 51, Green 22, Blue 53

White balance submenu:
R-Offset: 18
G-Offset: 25
B-Offset: 23
R-Gain: 18
G-Gain: 25
B-Gain: 26

10p White Balance submenu:
Interval Red Blue Green
1 0 0 -1
2 0 0 -1
3 0 0 0
4 -1 0 +1
5 +1 0 -3
6 +1 0 +1
7 +1 0 -2
8 0 0 0
9 +2 0 -6
10 +3 0 +6

-Picture Options Menu
Color Tone: Warm 2
Digital Clean View: Off
MPEG Noise Filter: Off
*HDMI Black Level: See Below
Film Mode: Cinema Smooth (I chose to use this feature with Blu-rays as I saw flickering with it OFF when the PS3 24p mode is set to Automatic. The Samsung's cinema smooth feature does a great job at 96hz)
Black Optimizer: Dark Room

*HDMI Black Level: There are 2 methods by which you can set this IF using a PS3.
1) You can set the RGB Full Range Mode option to "LIMITED" on the PS3 and use "Normal" (grayed out) for watching movies and "Low" while playing games or through a HTPC. This would also be the choice to use if NOT using the PS3 and its RGB Full Mode option.
2) You can set the RGB Full Range Mode option to "FULL" on the PS3 and leave the setting to "Normal" on the TV. This is the option I have chose so I do not have to ever switch the TV setting and instead let the PS3 control the proper spacing.

PS3 Settings

-BD/DVD Menu:
Cinema Conversion: Automatic
Upscale: Normal
BD/DVD Video Output Format (HDMI): Automatic
BD 1080p 24Hz output (HDMI): Automatic

-Display Settings Menu
RGB Full Range (HDMI): Full
Y Pb/Cb Pr/Cr Super-White (HDMI): On

<다른 설정값입니다.>

링크 : http://www.avsforum.com/forum/167-plasma-flat-panel-displays/1476482-samsung-pn60f5300-calibration-settings.html

My Samsung PNXXF5300 (Seperate Setting for Both 51inch and 60inch) Calibration Settings

Note: These calibrations were perfomed on the 2013 A Series. I'm unsure if they will work for the 2014 B Series


PN51F5300 설정#2:
Notes: Because there were some significant shifts in greyscale and brightness when engaging Cinema Smooth, I calibrated two modes, Cinema for 24p Blu-Ray viewing, and Standard for everything else.

For 60 HZ inputs (Cable Box/Sat, Game Systems)

--Picture menu
Mode: Standard
Cell Light: 18
Contrast: 92
Brightness: 46
Sharpness: 0
Color: 41
Tint: G50/R50

Picture size submenu:
Picture Size: Screen Fit

PIP: Off

Advanced settings submenu:
Dynamic contrast: Off
Black tone: Off
Flesh tone: 0
RGB Only Mode: Off
Color space: Custom
White Balance: [see below]
10p White Balance: Greyed Out
Gamma: 0
Expert Pattern: Off
Motion Lighting: Off [grayed out]

Color Space submenu:
Color Space: Custom
Red: Red 49, Green 23, Blue 15
Green: Red 46, Green 49, Blue 16
Blue: Red 6, Green 14, Blue 53
Yellow: Red 50, Green 50, Blue 17
Cyan: Red 47, Green 49, Blue 50
Magenta: Red 51, Green 22, Blue 53

White balance submenu:
R-Offset: 18
G-Offset: 25
B-Offset: 24
R-Gain: 18
G-Gain: 25
B-Gain: 23

10p White Balance submenu:
10p White Balance: Not available

Picture options submenu
Color tone: Warm2
Digital Clean View: Off
MPEG Noise Filter: Off
HDMI black level: Normal [grayed out]
Film mode: Auto 1
Black optimizer: Dark room


For 24p inputs (Blu Ray)
--Picture menu
Mode: Movie
Cell Light: 17
Contrast: 100
Brightness: 44
Sharpness: 0
Color: 45
Tint: G50/R50

Picture size submenu:
Picture Size: Screen Fit

PIP: Off

Advanced settings submenu:
Dynamic contrast: Off
Black tone: Off
Flesh tone: 0
RGB Only Mode: Off
Color space: Custom
White Balance: [see below]
10p White Balance: On
Gamma: 0 or -1 (Personal Preference, I calibrated at and used -1 and it didn't change the other measurements much for 0)
Expert Pattern: Off
Motion Lighting: Off [grayed out]

Color Space submenu:
Color Space: Custom
Red: Red 49, Green 23, Blue 15
Green: Red 46, Green 49, Blue 16
Blue: Red 6, Green 14, Blue 53
Yellow: Red 50, Green 50, Blue 17
Cyan: Red 47, Green 49, Blue 50
Magenta: Red 51, Green 22, Blue 53

White balance submenu:
R-Offset: 18
G-Offset: 25
B-Offset: 23
R-Gain: 18
G-Gain: 25
B-Gain: 26

10p White Balance submenu:
10p White Balance: On
Interval Red Green Blue
1 0 0 -1
2 0 0 -2
3 0 0 0
4 -1 0 +1
5 +1 0 -3
6 +1 0 +1
7 +1 0 -2
8 0 0 0
9 +2 0 -6
10 +3 0 +6

Picture options submenu
Color tone: Warm2
Digital Clean View: Off
MPEG Noise Filter: Off
HDMI black level: Normal [grayed out]
Film mode: Cinema Smooth for 24p
Black optimizer: Dark room

PN60F530 설정#3

PN60F5300:
Notes: These will be very innacurate if you use Cinema Smooth for 24p content, it caused an extremely large shift in greyscale so keep your Blu Ray player at 60hz or Film Mode to Off (Over 10 for some of the Delta E errors!!)

--Picture menu
Mode: Movie
Cell Light: 20
Contrast: 100
Brightness: 47
Sharpness: 0
Color: 46
Tint: G50/R50

Picture size submenu:
Picture Size: Screen Fit

PIP: Off

Advanced settings submenu:
Dynamic contrast: Off
Black tone: Off
Flesh tone: 0
RGB Only Mode: Off
Color space: Custom
White Balance: [see below]
10p White Balance: On
Gamma: -1
Expert Pattern: Off
Motion Lighting: Off [grayed out]

Color Space submenu:
Color Space: Custom
Red: Red 49, Green 19, Blue 16
Green: Red 55, Green 52, Blue 15
Blue: Red 9, Green 15, Blue 54
Yellow: Red 50, Green 51, Blue 19
Cyan: Red 50, Green 51, Blue 52
Magenta: Red 49, Green 24, Blue 53

White balance submenu:
R-Offset: 29
G-Offset: 25
B-Offset: 27
R-Gain: 24
G-Gain: 25
B-Gain: 22

10p White Balance submenu:
10p White Balance: On
Interval Red Green Blue
1 0 0 +2
2 -1 0 +1
3 0 0 +1
4 +2 0 +2
5 0 0 0
6 +1 0 0
7 0 0 -4
8 0 0 0
9 -2 0 -6
10 -3 0 -1

Picture options submenu
Color tone: Warm2
Digital Clean View: Off
MPEG Noise Filter: Off
HDMI black level: Normal [grayed out]
Film mode: Auto1 of Off (Never use Cinema Smooth with these settings)
Black optimizer: Dark room

PN60F5300#4 :  전문 장비로 캘리브레이션 한 값인 것 같습니다. 별로 마음에 안든다는 사람들도 있네요.

링크 : http://reviews.plasmatvbuyingguide.com/samsung-plasma-tv/samsung-f5300-picture-settings.html

Picture Mode:	Movie				10p White Balance = ON Interval Red Green Blue 1 -1 1 -2 2 -2 -2 -2 3 -3 -1 -4 4 -4 0 -3 5 -1 -2 -2 6 -5 -1 -1 7 -7 1 2 8 -1 1 2 9 -5 1 7 10 -3 0 -3
Cell Light	18
Contrast	100
Brightness	48
Sharpness	12
Color	52
Tint	G51/R49
Color Tone	Warm1
Digital Noise Filter	OFF
MPEG Noise Filter	OFF
HDMI Black Level	Normal
Film Mode	OFF
Black Tone	OFF
Dynamic Contrast	OFF
GAMMA	-1
Expert Pattern	OFF
RGB Only Mode	OFF
Color Space	Auto
Flesh Tone	0
Edge Enhancement	OFF
Motion Lighting	OFF
Energy Saving	OFF
ECO Sensor	OFF
Auto Power OFF	OFF

PN60F5300#5 : 

링크 : http://www.avsforum.com/forum/167-plasma-flat-panel-displays/1476482-samsung-pn60f5300-calibration-settings-29.html

Baseline settings for PN60F5300 B panels:
Out of the box, try the settings below on your TV. These should already provide a big improvement in overall picture quality.

Mode: Movie
Cell Light: 20
Contrast: 95
Brightness: 47 or 48 (check what setting gets rid of the green dithering pattern on a black screen)
Sharpness: 0-15 (I prefer 0)
Color: 50
Tint: G50/R50

Picture size submenu:
Picture Size: Screen Fit

Advanced settings submenu:
Dynamic contrast: Off
Black tone: Off 
Flesh tone: 0

Color space: Auto 
Gamma: -1

Picture options submenu
Color tone: Warm2
Digital Clean View: Off
MPEG Noise Filter: Off
Black optimizer: Dark room 

These are pretty good baseline settings for dark room viewing (~34fL output). 

Set Black Optimizer to "Auto" (increases peak output to ~42fL) and increase Gamma for daytime viewing as necessary. Gamma of -1 is good for Dark Room viewing with an average Gamma ~ 2.25.

If using Standard mode, use similar settings but drop Color to 44 from 50 as Standard mode at Color of 50 is a bit oversaturated.

If you want to try my full calibration (CMS and white balance, click on the Spoiler tag to view my calibration and comments pertaining to its use)

* 삼성 F5300 60인치 로컬 변경방법
* 블프때 60인치 PDP TV 직구기
* 삼성 PDP F5300 캘리브레이션 설정값
* 하모니로 삼성 TV Service mode 진입하기
* 로지텍 하모니700(Harmony700) 설정하기
* 삼성 PDP F5300 완벽한 로컬 변경하는 방법